How do you place an E-ZPass? This is one of the most pertinent questions when someone new to the concept first gets an E-ZPass. Understanding the correct placement of the tag is essential, whether you are using it on a highway toll booth or state crossing. People in Connecticut have it immensely easier since there is the EZ Pass CT service available.
For first time users, or even many experienced users, the truth is that even flags like these are usually missed. This will be an exhaustive guide on how to properly fix your E-ZPass.
What Is an E-ZPass and Why Does Placement Matter?
Before answering the question how do you place an E-ZPass, it’s important to understand what it is and why its placement matters. An E-ZPass is a device that allows drivers to pay for tolls using an electronic wireless payment system that deducts the amount directly from the user’s E-ZPass account. The communication to the gantries is done via RFID Technology.
If the E-ZPass is not in the correct position, there is a high likelihood that the E-ZPass will not be read, forcing one to revert to the old ways of manual payment or court a hefty fine for a misplaced E-ZPass.
Placing an E-ZPass in Your Vehicle
With an understanding on the E-Z Pass in place, we will investigate how do you place an E-ZPass into your vehicle while expecting it to function efficiently. Although the guidelines differ with the type of vehicle being used, there are a few rules that remain constant no matter the vehicle type.
1. For Passenger Vehicles
E-Zpass is widely used by the drivers of passenger vehicles. Here’s how to install E-Zpass in your vehicle:
- Locate the Correct Spot: It is recommended to mount the E-Zpass on the inside of the car’s windshield, a little over the rearview mirror. The reason behind this is that the majority of toll booth sensors are positioned within a particular area above your vehicle.
- Avoid Placement in Front of Sensors: Ensure that the E-Zpass is not covered with any metal or windshield tint that may inhibit the signal.
- Follow State Guidelines: If, for instance, you are a Connecticut E-Zpass holder, it is vital that you affix the device following the instructions given by EZ Pass CT. Different states have specific rules about where on the windshield it should be placed.
2. For Trucks and Larger Vehicles
While driving larger vehicles, such as a truck, placement is still important, but not quite the same.
- Windshield Placement: It is necessary to place the E-Zpass on the windscreen in the middle of the board, at the upper side of the driver’s rearview mirror. This will ensure that the device is within the range of the sensors for full efficiency.
- Take Advantage of a Holder:
EZ Pass CT is just one toll agency that will most likely offer a holder for big vehicles so that the tag can be securely fastened and easily detached for cleaning or other modifications.
3. Application on Motorcycles and Other Two-Wheeled Vehicles
There is often a small hurdle for motorcycles or mopeds to mount the E-ZPass, and it’s that there is no windscreen to adhere the tag to. Here is the option you have:
- Bond the E-ZPass to the Motorcycle:
Get the device and firmly adhere it on the left side of your motorcycle on the front fork. Ensure it is very tightly put, so it doesn’t come off or sway loose while driving. - Attach Using the License Plate:
If accessible, mount the E-ZPass to the license plate of the motorcycle using a specific type of mount.
To facilitate reading by the toll facility to ensure effective functioning of the E-ZPass devices, motorcycles need to position these units uniquely.
Tips for Correct E-ZPass Placement
Knowing how do you place an E-ZPass is just the start. Here are a few key tips to help ensure your device works every time:
- Be Cautious Of Tinted Windscreens:
Certain cars possess windows that are remotely tinted and this can block the E-ZPass signal. Vehicles equipped with such technology will need to reposition the device or follow predetermined guidelines set out by the tolling authority.
- Regular Maintenance Is Necessary:
The area near the device should be cleaned on a regular basis to get rid of dirt and smudges as these will affect the devices performance.
- Check What Obstructs The E-ZPass Holder Area:
Make it a point to check whether there are air fresheners and unnecessary stickers that conceal the E-ZPass holder. These will prevent the device from functioning properly.
Using the above steps will aid with ensuring that your device is fully functional and avoid it malfunctioning.
How Do You Switch E-ZPass While Changing Cars?
Users of E-Z Pass regularly operate their E-Z Pass in many vehicles. If you are transferring your device from one vehicle to another, be certain that the device is placed differently than the previous position. Here are several simple procedures:
- Remove and Reattach the E-ZPass Delicately take off the device from the car’s windshield or the original location and attach it to the new one. Make certain to mount it firmly so that it does not come loose.
- Revise Your Account Details When changing vehicles, ensure that you do not forget to update your account so that it corresponds to the new vehicle. This will prevent all problems associated with using a vehicle that is different from the one stated in the account while going through tolls.
Changing cars might involve a little bit of adjusting, however one can easily monitor whether the E-Z Pass has been appropriately set.
How to Troubleshoot an E-ZPass That Isn’t Working?
Periodically, everything may seem alright when customizing your E-Z Pass, only to later discover that nothing is working as expected. Here is how you can troubleshoot any issues you are experiencing:
- Check for Roaming Profile Damage: Check the device for any cracks or other shells of wear. If broken, you may be required to swap them out.
- Cleansing the Device: The efficiency of the E-ZPass can be disrupted due to dirt or other particles. Use a soft cloth and wipe it gently.
- Call Customer Care: You can even go one step further and just contact the toll authority or EZ pass CT and get solutions for the problems you are facing. They have help centers trained to assist you and find answers to such problems.
Remember, no matter what the issue is, you can always get your E-ZPass to work after a little bit of work.
Conclusion
Now that you know how do you place an E-ZPass, traveling through tolls can be an easy task. Whether you are using it in Connecticut or any other state, placement is crucial for the device’s efficiency.
Follow the guidelines provided, clean the device appropriately, and make sure it is properly affixed to the vehicle. If everything is done right, you will have no issues with your E-ZPass and will be able to cruise through the toll booths.
